Electric sliding door manufacturer: When installing electric sliding doors, there are five key details to pay attention to!

Details determine success or failure. The installation of electric sliding doors, as a major project in house construction, involves a lot of knowledge. If the installation of electric sliding doors is not done carefully, it can easily lead to unsatisfactory installation results, and subsequently cause a series of problems. So, how can we ensure the details of the installation of electric sliding doors are done well? My friend, I will share with you the five key points for the installation of electric sliding doors. 

Important points to note when replacing the electric sliding door 

If the house needs to be reinstalled, it is best to replace the electric sliding door first before proceeding with the next installation steps. This is because during the window removal process, the walls inside and outside the house will be damaged. Therefore, replacing the electric sliding door first and then installing it can reduce the damage to the house's walls. 

When purchasing an electric sliding door, caution is necessary. 

When purchasing an electric sliding door, it is essential to go to a reputable building materials market and choose an electric sliding door from a well-known high-quality brand. Because the quality of the door frame of the electric sliding door will determine the grade, sealing performance and anti-aging properties of the entire electric sliding door. 

Be cautious if the electric sliding door turns yellow. 

If you notice that the appearance color of the plastic electric telescopic door is too white or grayish, it indicates that the stable components in its material are insufficient. Over time, it is prone to aging and turning yellow. Therefore, be sure to pay close attention before purchasing. 

The electric sliding door accessories need to be inspected. 

It is necessary to inspect the hardware components of the electric sliding door. At the bottom of the sliding window frame, there should be an aluminum sliding rail to facilitate its replacement. In the middle of the window sash, there should be a fixing piece, which is the key to determining the sealing performance of the sliding window. 

When installing the electric sliding door, please be sure to follow these instructions. 

When installing the electric sliding door, the gap between the window frame and the wall should be filled with foam glue. Also, both the inside and outside of the window frame must be sealed with silicone or sealant to prevent water leakage. After the installation is completed, the protective film should be removed, which can extend the service life of the electric sliding door. 

When installing an electric sliding door, pay attention to the following five key details to ensure a smoother installation process, a longer lifespan for the door, and less hassle during maintenance of the house!