What are the differences in maintenance for the electric sliding door in summer and winter?

The overall maintenance principle for electric telescopic doors is to follow the instructions provided by the electric telescopic doors themselves. For different ranges and production processes of electric telescopic doors, the usage instructions and maintenance instructions will definitely be different. In addition, we also need to pay attention to the special maintenance measures and precautions brought about by weather changes for electric telescopic doors. The maintenance principles for winter and summer are different, and the methods are also different. This mainly depends on the material of the electric telescopic door and the selection of the electric telescopic door motor.

Firstly, regarding the selection of materials, there are certain matters to note. For electric telescopic doors that can adapt to cold weather, we should appropriately increase the hardness and the expansion coefficient should not change too much. This is the first issue to consider before choosing the manufacturing of the electric telescopic door. For electric telescopic doors used in the north, sometimes the temperature can be around -30 degrees Celsius in winter and around 30 degrees Celsius in summer, with a temperature difference of 60 degrees. Such a large temperature difference can cause serious safety problems for the use of the electric telescopic door if the material selection is not good. This is a point that designers should pay attention to.

Secondly, we need to replace the motor in time according to the changes of seasons. Different seasons require different motors, which is the first principle that any equipment follows. We should not artificially create obstacles and maintenance obstacles. The motor in summer does not have antifreeze, while the motor in winter must be filled with antifreeze. This is a basic knowledge for the use of the motor. Depending on different places, there may be stricter requirements for the motor and special requirements for the material. These should be considered in the design of the electric telescopic door, and processing and production should be carried out in accordance with local conditions and practicality. Finally, we need to promptly clean the guide rails and check whether all the connecting parts are functioning properly. These aspects should not be overlooked during the usage process, and they are also the issues and matters that we frequently pay attention to when using the electric telescopic door.